The first thing you have to decide is whether you are going to use the Tom Connector software or the Simhub software to make the LEDs work.

One of these two programs is necessary to send the necessary information from the game to the device.

Tom Connector is a very simple software to use, you just have to start the program and it will detect the device and the game you are playing, it is a software developed by us and uses our philosophy "ease of use". Simhub is a more complicated program to configure although it offers more options, Simhub is not developed by us and is a third-party software and therefore we cannot make changes to this software.

Using Tom Connector

If you have decided to use Tom Connector these are the simple steps to follow to use the software.

1. Download the program from the following link.

DONWLOAD TOM CONNECTOR

2. Unzip it anywhere you want and run the file "Tom Connector.exe"

3. Configure the game you want to play with the following guide, this guide only works for Tom Connector.

GAME CONFIGURATION FOR TOM CONNECTOR

4. Start the game and enjoy !!

Using Simhub

Everything said above is not valid for Simhub, Simhub has its own way to configure each game to work with this software.

To use this software, the first thing to do is configure it so that the device works with Simhub.
You can do this by following the guide on this link.

SIMHUB GUIDE

Tom Connector mode and Simhub mode

For the LEDs to work with the Tom Connector program or the Simhub program, the steering wheel must be switched to the appropriate mode.

To switch between the Tom Connector mode and the Simhub mode, you have to press three buttons on the steering wheel at the same time, it does not matter that three buttons are, when pressing three buttons the LEDs will light up in blue to indicate that the steering wheel has entered the mode Simhub and will turn red to indicate that the steering wheel has entered Tom Connector mode.