TOMY D2 Pro 4.3" user manual.

The first thing you have to decide is if you are going to use Tom Connector software or Simhub software to control the dashboard.

One of these two programs is necessary to send the necessary information from the game to the dashboard.

Tom Connector is a very simple software to use, you just have to start the program and it will detect the device and the game you are playing, it is a software developed by us and uses our philosophy "ease of use". Simhub is a more complicated program to configure although it offers more options, Simhub is not developed by us and is a third-party software and therefore we cannot make changes to this software.


Using Tom Connector

If you have decided to use Tom Connector these are the simple steps to follow to use the software.

1. Download the program from the following link.

DONWLOAD TOM CONNECTOR

2. Unzip it anywhere you want and run the file "Tom Connector.exe"

3. Configure the game you want to play with the following guide, this guide only works for Tom Connector.

GAME CONFIGURATION FOR TOM CONNECTOR

4. Start the game and enjoy !!


Using Simhub

Everything said above is not valid for Simhub, Simhub has its own way to configure each game to work with this software.

To use this software, the first thing to do is configure it so that the dashboard works with Simhub.
You can do this by following the guide on this link.

SIMHUB GUIDE


Using the dashboard

On the screen you can press GT3, LMP1 ... to go to the different screens or press "Stand by" to turn off the screen, if you touch the screen it will turn on again. By default the device works for the Tom Connector program, to work with Simhub you have to press "SIMH mode".

 
 
Once inside one of the data display screens, you can press "<<" to return to the initial screen or ">>" to advance to the next data display screen, if any.